Posted on: March 15, 2021 Posted by: mysun08481 Comments: 0

HYT H1 Azo Project

HYT launched the H1 replica watch in 2012, which can overcome gravity and indicate the time with liquid. This year, the new H1 Azo project will continue its hydropower volcano expedition.

The basis of H1

The idea that led to H1 is simple, it consists of two flexible reservoirs fixed at both ends of the capillary. One is an aqueous liquid filled with fluorescein, and the other is a transparent viscous liquid. To separate them: the repulsive force of the molecules in each liquid, with a meniscus to mark the boundary between the two.

The two reservoirs are located at 06:00. When the first one compresses, the second one expands, and vice versa, causing the liquid to move in the capillary. With the passage of time, the fluorescent liquid continues to develop. The half-moon-shaped half-moon-shaped elbow marks the breaking point along with the other fluids in the test tube and indicates the time. At 18:00, the fluorescent liquid returns to its original position and moves backward. The secret to make the reservoir work? The two bellows are made of high-strength, flexible electroplated alloy, and each bellows is driven by a piston. The hydraulic system is activated by mechanical best cheap watches

The mechanical movement is carefully planned by Jean-Fran├žois Mojon and his Chronode SA team. Its mechanical movement is located on the upper part of the watch and pushes the cam, which pushes the piston and activates the bellows.

The main challenge is to find the interface between the mechanical movement and the hydraulic system in a closed waterproof circuit-this task becomes more complicated due to the limited space to accommodate both. They must be assembled separately to maintain independence before they can operate at the same time. This is a very fine modular integration, which involves other restrictions, such as dividing the dial into two parts through the side for installation.

The yellow polyepoxy case of the cheap luxury watches is 48.8 mm. The screw-locked crown at 6:00, the crown guard and the metal shrapnel are all located in the titanium DLC. The watch is protected by curved sapphire crystal glass with anti-reflective coating on the inside and screw-in sapphire on the back. The waterproof depth is up to 100 meters.
The black unstructured dial shows gray indexes and numbers, as well as a gray minute hand. The regulator is at 12:00, the small second is at 09:30, and the power reserve indicator is at 02:30.

The manual winding mechanical movement is HYT’s unique movement. Its functions are counterclockwise, minute and second hands. It provides a 65-hour power reserve. The bridge is manually chamfered and decorated with Geneva ripples.

H1 Azo Project is equipped with a rubber strap and a titanium black DLC pin buckle.

Replica HYT H1 AZO PROJECT 148-PA-21-GF-RU Watch


Titanium / PVD

Manual Winding
Swiss Made


10.00atm / 100.00m / 330.00ft

Retrograde Hours
Power Reserve

Pin Buckle